Offer 1" (inch) Float Cock Valve For Deep Water Container
float valve (also balltap or ballcock ) is a mechanism or machine
for filling water tanks,
such as those found in flush toilets, while avoiding overflow and
(in the event of low water
pressure) backflow.
A Float detects changes of elevation in the liquid free surface and opens
or closes a valve accordingly. Large numbers of small Float valves are used in domestic water systems. A Float valve maintains the level in the cold water header tank which regulates the pressure of the hot water system.
This modle of float valve can be widely used in water tanks air coolers,water dispensers,farms and some other equipments,which is easy to install,less abrasion,corrosion-resistant and
non-polluting.
Model |
DN25CL |
Thread (inch) |
1 |
Body Material |
ABS |
Float Material |
PE |
Core Material |
NR |
Float Rate(L/min) (P=0.6Mpa) |
428 |
Working Presssure |
0.1-1.2Mpa |
Working Temperature |
0.1°C-70°C |
Self-locked and stability
• Less abrasion,conrrosion-resistant,non-polluting.
• Quick water flow rate characterristics.
• Installed in any angles.
(High temperature,material requests,strong acid and alkali need to
be customized)
Small and easy-to-install.
This valve has no metal parts which makes it ideal for use in water
and other liquid containers as it won't rust or corrode.
Loose the screw on the arm to adjust the float position and achieve
the horizontal and vertical installation.
Each of install method will not affect the performance.
1.If the body and pipe joint leak water, please check water tape is
wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve,
too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the
garbage out in time.
4.Please do not use the cleanser which will cause damage when clean
the float valve.
